Seattle Home Builders: Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack

Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack

Product Details

Product Dimensions: 48 x 6 x 24 inches
Shipping Weight: 61.8 pounds (View shipping rates and policies)
Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
ASIN: B0009I8AO6
Item model number: PHL-1R

By : Racor
Price : $149.99
You Save : $60.01 (29%)

Product Description

Amazon.com Item Description
The RacorPro PHL-1R Pro HeavyLift Storage Rack lets you load and lift heavy items to the ceiling for storage with no the have to have for a ladder. It helps to no cost up valuable floor space in your garage or storage area and allows you to retailer heavier items, such as furniture, lawn mowers, tires, canoes, snow throwers, and a great deal more. The heavy-duty four-by-4-foot platform is built to final and gives 16 square feet of additional storage space in your garage or storage location.

The RacorPro PHL-1R Pro HeavyLift Storage Rack:

Frees up an additional 16 square feet of floor space.
Handles up to 250 pound items.
Securely and safely locks into place.

The heavy-duty design can manage 250 pounds. .
Raising and lowering heavy items takes minimal work, thanks to the lift's exceptional pulley technique. .Heavy-Duty Lifting Capacity for Heavier ItemsThe PHL-1R is each difficult and durable, and it is built to manage heavier items up to 250 pounds. The heavy-duty steel assistance beams and four-by-4-foot platform are created from high-top quality materials that are created to deal with tough loads and produce years of consistent efficiency. The unit is built to lower eight feet from the ceiling, accommodating storage spaces with taller ceilings. The drill driver attachment permits you to raise and lower the platform applying your own drill.
The exceptional pulley system tends to make it painless to raise and lower heavy items with minimal work on your part. With a durable winding axle that works in conjunction with the pulleys and robust nylon cables, the PHL-1R handles the brunt of the weight so you don't have to, when raising or lowering the platform easily and smoothly.
Safety Lock Ensures Security and StabilityThe innovative safety lock ensures that the load stays locked into spot when totally raised to the ceiling. Merely use the winding crank to engage the safety lock when the platform is raised to its highest position, and use the winding crank's integrated hook to disengage the security lock and safely lower the platform.
An Further 16 Square Feet of Storage Space for Your GarageThe PHL-1R's hard four-by-four-foot platform provides you an further 16 square feet of beneficial storage space in your garage or storage area. This makes it possible for you to retailer your lawn mower out of the way during the winter or to store your snow thrower during the summer months, clearing valuable floor space and building tidier, additional valuable quarters.
The RacorPro PHL-1R HeavyLift Storage Rack measures 49.25 x 17.five x 7.25 inches (packaged) and weighs 74 pounds (packaged). It comes in a smooth black finish and contains all needed hardware. Additional tools essential for installation include: stud finder (for drywall ceilings), adjustable or box end wrench, socket wrench, cordless drill/driver, Phillips screwdriver, pencil, and a 4-foot straightedge or chalkline.
What's in the BoxWinding crank assembly, two arm assemblies, two cable assemblies (including nylon cables), 3 wire grids, two wire beam supports, center spindle square finish, center spindle round end, gear drive, Allen wrench, 4 end caps, 20 hex bolts, four Allen head screws, two hex head screws, two fender washers, eight long machine bolts, 16 washers, eight nuts, 12 "J" hooks, 12 washers, 12 nuts.
This ceiling-mounted garage elevator lets you load and lift storage items overhead, out of the way, with no a ladder. Basically load the 4-by-four-foot steel platform while you safely stand on the ground, then raise it to the ceiling by cranking the handle. It is outstanding for boxes, tires, big tools, snowblowers, ladders, lumber, third-row auto seats, canoes, kayaks, and additional.

Technical Details

Roof-mounted garage stock rack; pulley system raises and lowers for easy access
Lifts and stores up to 250 pounds high above garage floor without using a ladder
Heavy-duty steel support beams; assembly required
Includes support beams, 4 by 4 platform, winding axle, vinyl coated steel cable, mounting hardware
4-square-foot storage platform; 76 pounds; 1-year limited warranty

Buyer Evaluations

Right after shopping for a garage ceiling storage method, I purchased this device. I was attracted to the ability to raise and lower the platform to load and unload items. This avoids the apparent pitfalls of utilizing a ladder to hoist significant or heavy items up from the ground.
In summary, I am reasonably pleased with the general product with some exceptions mentioned beneath. Having said that, I will caution prospective buyers that the design of this device is unforgiving. Unless your ceiling joists are Exactly 48" apart (they can be 1.five" much less but not additional than 48"), installation will be no exactly where near as quick as the video on the web page. You can need to have to mount this to a rigid board very first if your joists are not 48" apart. The axle is not produced to be adjustable and I locate this to be a key design flaw of the device.
The foundation of the technique consists of 3 heavy metal grates that are secured to two metal cross beams with J hooks. I had a small difficulty aligning the J hooks with the holes on the metal beams. Having said that, by far, the most trouble I had was with securing the method to the ceiling. I definitely did not want to mount this to a board before securing it to the ceiling for aesthetic factors. My ceiling joists were about 49" apart (rather of 48") and this developed a Especially problematic installation. You will need to secure this into wood (and not just the ceiling drywall) and you can not mount the arms of the device further than 48" apart as the axle will not be extended adequate. I ended up lengthening the axle by a couple of inches by screwing each halves of the axle together with only the initially set of holes. The two halves of the axle are supposed to come together with 1 inside the other aligning two sets of holes on each and every piece. I only went as far as the initial set therefore generating it a small longer. Then I purchased some aluminum 1/2 inch metal from a hardware retailer and reinforced the axle by screwing it to two sides of the axle. Preserve in thoughts that the axle is not completely load-bearing so as lengthy as it is rigid and reinforced, the program will work fine (see my uploaded picture of the lengthened and reinforced axle).
Concerns continued when I implemented the included hardware lag bolts to screw the arms into the ceiling joists. Utilizing a drill, I pre-drilled the holes as instructed and employed a socket wrench to screw the lag bolts to the joists. I torqued 4 of the heads off of the low-priced lag bolts. Do oneself a favor and go buy some better lag bolts at a hardware store ahead of installing this device. The included lag bolts are entirely inferior. Following finishing the installation, it worked as described and I loaded it with a couple of hundred pounds of factors I had previously kept on my garage floor. I will also mention that employing the included crank device to raise and lower the platform, while not overly tricky, is a beneficial perform out.
General, I would advise this item IF you know your joists are no additional than 48" apart (or you are comfortable mounting it to a board initially) and you go obtain some decent lag bolts just before attempting to secure it to the ceiling.

This is a excellent storage solution for garages with high ceilings. When installed the heavy lift operates really nicely.
One drawback is that numerous garages have a double layer of 5/eight" drywall on the ceilings as mine did. The mounting lag bolts are only 12(the metric equivilant) screws 2" extended which is woefully short if the added thickness of drywall is regarded as. The only conveniently readily available lagscrews I could discover that had been longer were 1/4" by 3" extended. These were as well significant in diameter to fit via the 12 mounting slots in the ceiling brackets, so I had to drill new holes which was very labor intensive and cumbersome.
Secondly, The order of operations as described in the installation directions is not extremely usefull if you are installing the lift by your self. It is significantly simpler to loosely mount the center of every ceiling bracket to the ceiling initially and then attach the extension arms one particular at a time. If this is done first as indicated in the directions, the assemblies are prety heavy, and cumbersome to be holding over your head even though up on a ladder, pre-drilling holes via the bracket, and then installing the lag screws. This expense me at least an hour to assemble, and then dis-assemble the brackets just so I could handle the peices.
Thirdly, the instruction have a flat out error when it comes to the order of operations for installing the winding shaft. If you follow the instructions as written, you will once more have to dis-assemble what you are instructed to do. The winding shaft need to be inserted by means of both ceiling brackets initially, via the gear box brakcet, and back into the bearing bracket. Following this the gear box can be installed.
Lastly, it is rather fundamental that the brackets are not installed as well far apart. I did not calculate the tolerance offered, but ran into a issue when my obtainable ceiling joists had been between 49 and 50 inches apart. This rendered my lift incapable of getting assembled with no modification.
So far I have installed 2 of my three lifts, and each lift had 1 nut which had no threads in it. This left me one particular nut brief for every single assembly. If this is a typical piece of hardware for the installation, there had been no self tapping screws included for this nut. I ended up needing a several remedy for holding the winding crank together.
The drawbacks of this lift are pretty typical of most "low cost" goods these days that are getting manufactured "off shore". This is a excellent device with various good quality oversights, like the lack of a mastery of the English language.